Bambu Lab's support material creates smooth supported surfaces and easy removal of supports.
Support for PA/PET
SKU: S03-G1-1.75-500-spl
$39.99Price
Only 8 left in stock
Cautions for Use
- ONLY used for support interface
- Not used for printing models alone
- Dry out before use
- AMS compatible
- AMS lite NOT Compatible
- Enclosure Printers Required
Product Features
- Easy removal by hand
- Perfect support interface
- Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Recommended Print Settings:
Drying Settings (Blast Drying Oven) 80 °C，12h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 260 - 290 °C Bed Temperature (with Glue) 80 - 110 °C Printing Speed < 100 mm/s
Physical Properties:Density 1.17 g/cm³ Vicat Softening Temperature N / A Heat Deflection Temperature N / A Melting Temperature 255 °C Melt Index 29.2 ± 2.1 g/10 min
Mechanical Properties:Tensile Strength N / A Breaking Elongation Rate N / A Bending Modulus N / A Bending Strength N / A Impact Strength N / A
