PLA Wood

Cautions for Use

• Dry Out Before Use
• AMS & AMS lite Compatible
• 0.2 mm Nozzle Not Compatible

Product Features

• Feels Like Real Wood
• Matte Finish, Fine Texture
• Integrates Perfectly with Other PLA
• Comes with Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Recommended Print Settings:

Drying Settings (Blast Drying Oven)	55 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 240 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 250 mm/s

Physical Properties:

Density	1.21g/cm³
Vicat Softening Temperature	64 °C
Heat Deflection Temperature	57 °C
Melting Temperature	156 °C
Melt Index	29.4 ± 1.7 g/10 min

Mechanical Properties:

Tensile Strength	26 ± 5 MPa
Breaking Elongation Rate	15.3 ± 3.1 %
Bending Modulus	2780 ± 120 MPa
Bending Strength	55 ± 4 MPa
Impact Strength	15.7 ± 3.7 kJ/m²