PLA Glow

AMS Compatible!
AMS lite Not Recommended
0.2 mm Nozzle Not Compatible

• Unique Glow in Low Light Conditions
• Includes Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Recommended Print Settings:

Drying Settings (Blast Drying Oven)	55 �C?8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 �C
Bed Temperature (with Glue)	35 - 45 �C
Printing Speed	< 250 mm/s

Physical Properties:

Density	1.26 g/cm�
Vicat Softening Temperature	56 �C
Heat Deflection Temperature	55 �C
Melting Temperature	155 �C
Melt Index	23.3� 2.4 g/10 min

Mechanical Properties:

Tensile Strength	32 � 3 MPa
Breaking Elongation Rate	8.6 � 1.2 %
Bending Modulus	2640 � 130 MPa
Bending Strength	76 � 4 MPa
Impact Strength	27.3 � 2.2 kJ/m�