PLA Galaxy

AMS & AMS lite Compatible
0.2 mm Nozzle Not Recommended

• Appealing from Every Angle
• Sleek Glossy Finish
• Effortless Printing
• Comes with Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Recommended Print Settings:

Drying Settings (Blast Drying Oven)	55 °C，8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 250 mm/s

Physical Properties:

Density	1.19 g/cm³
Vicat Softening Temperature	56 °C
Heat Deflection Temperature	52 °C
Melting Temperature	156 °C
Melt Index	11.0 ± 1.7 g/10 min

Mechanical Properties:

Tensile Strength	26 ± 3 MPa
Breaking Elongation Rate	9.3 ± 1.1 %
Bending Modulus	2200 ± 120 MPa
Bending Strength	58 ± 3 MPa
Impact Strength	55.4 ± 3.7 kJ/m²