Bambu 3D Effect Plate

Note

1. For best results, we recommend applying the 3D effect spare sheet only on the official steel plate from Bambu Lab.

2. Bambu Engineering Plate (the other side of Bambu Cool Plate/High Temp Plate) can also be used for applying the Bambu 3D Effect Sheets. If you plan to apply a 3D effect spare sheet on an existing plate, ensure that you remove the previous sheet and clean any glue residue completely before installing the 3D effect spare sheet. Make sure the surface is dry and clean before the application.

3. Please set the plate type to Smooth PEI/High Temp Plate and carefully follow the Heatbed Recommended Settings when using the Bambu 3D Effect Plate.

4. The 3D effect patterns require a clean surface to remain visible. Grease can cause the patterns to disappear. It is essential to keep the surface clean. We recommend using hot water and detergent for cleaning, and avoid touching the surface.

Considerations

1. Due to reflections, the LIDAR calibration will not work as expected when using Effect Sheets. We recommend skipping the LIDAR calibration sequence, or calibrating with a regular plate.

2. The 3D Effect Spare Sheets are considered consumables. To prolong the lifespan of the transfer textures, try placing your print objects on different areas of the sheet.

3. Do not apply glue to the sheet surface.

4. Pay close attention when using a scraper to remove prints, to avoid damaging the sheet surface.